Full Service Roadshow

We are permanently at your disposal to support you in your planning - from the preparation to realization including hotel reservation (if desired)
Specific communication programs meeting the communications of the target companies: preliminary announcements in several stages with mailings, flyers and posters according to internal communication
Production of a flyer and roadshow magazine for on-site distribution before and during the exhibition
Exhibition booth with PC terminal including light and power, roll up display (60 x 200 cm) with printing included, brochure stand
Branding of the truck outside with your logo
Snacks and refreshments on-site

For information on exhibiting please download the exhibitor presentation (PDF, 0.3 MB) or contact us at contact@auto-roadshow.com. We look forward to welcoming you on board!

Exhibitors 2009

	The Japanese manufacturer A'SYCK offers multicolored LEDs, LED lighting systems and customized LED products. The product range of A'SYCK is broad in scope: the chip LEDs are available in full, multi-colour and two colour versions, all available in two dimensions (3x3mm/3x4mm). The full-coloured LEDs are suited for indoor and outdoor use (5mm/8mm) which A'SYCK also offers merged into light surfaces or as a full-LED lamp (35 mm in diameter). The longevity and reliability of the products display A’SYCK's high quality standard: For example, the ISO 9001 certified LEDs glow for 20000-40000 hours. In the United States and Japan A'SYCK already cooperates with car manufacturers for their automotive interior lighting design. A'SYCK was established in Kyoto (Japan) in 1992 and produces in accordance to ISO 9001 at various locations throughout Japan. A'SYCK has a large development and design department as well as most modern facilities for the production of the entire LED assembly, wire bonding, encapsulation and testing. A'SYCK manufactures most of the parts of its LED systems on its own injection moulding machines from 20 to 250 tons as well as on its own PCB production lines.
	We are the Specialists - Efficient, competent, personalized In accordance with this concept, we have succeeded over the last 20 years in becoming a globally recognized manufacturer of innovative measurement and inspection engineering systems. Our company both manufactures measurement instruments and provides custom test station solutions. This means we are a one-stop-shop for technical solutions. Our proven experts, all with advanced education in engineering or in the natural sciences, search out and implement affordable, customized and application- specific solutions. We possess the best references by having accomplished projects for practically all major firms in the automotive, mechanical engineering and power production industries. We always find the best solution: Customers appreciate our unique know-how. Together, we design innovative partial or total turn-key solutions which always achieve state-of-the-art engineering at economical cost. Our customers confer with us for every project - because they know from experience that we will do what it takes to earn their trust. In the rare cases where we can only offer the second best solution, we at least know what the best one is and refer our customers to it.
	Cypress delivers high-performance, programmable mixed-signal solutions. The customer benefits due to short time-to-market and an outstanding utility system. The range of products includes PSoC(r) products (Programmable System-on-Chip), USB controllers, universal, programmable clock-modules and memories which fit the requirements of AEC-Q100. In addition to its market leadership in the areas of SRAM and USB, Cypress focuses on Body Control and Infotainment with its innovative, configurable mixed-signal PSoC device. Capacitive Sensing and Capacitive touch screens have their special focus on HMI. Besides being an 8bit controller, the PSoC contains configurable analogue and digital blocks whose functions can be defined by its user. Its free configurability enables flexibility in changing requirements or design specifications. Especially within the automotive sector effective solutions can be easily developed based on the PSoC concept for the following areas: High Brightness LED, lighting control, Capacitive Touch Control / HMI (Cap-Sense), Proximity sensing (keyless entry), Door (Window Control, Anti-Pinch), Multimedia Control Panel, Climate Control, and Wireless (2.4GHz)
	Hamamatsu Photonics recently introduced some brand-new products for automotive applications. One of them is a new optical sensor called CAIPIC for steering angle detection as needed for ESC. Another new development are our fibre optical transceivers for next generation MOST network, capable of 150 MBps in ring topology according to MOST physical layer specification. Brand-new is also our 'wafer level chip size package' that enables tiny devices with superior performance. In this package we offer a colour sensor that can be used for ambient light detection for example to adjust brightness of displays. Hamamatsu Photonics has delivered continuously top-quality opto-semiconductors into automotive industry for over 30 years now. They are used in safety systems, automatic climate control systems, data communications, and many other advanced car features. Today, there are tens of millions of Hamamatsu parts operating reliably in the field. Each individual part goes through several 100% inspection steps before it ever reaches the customer. We are trusted by car manufacturers because of the high reliability and performance of our products.
	The MOST Forum 2010 will take place on March 23, 2010, concurrent with the MOST Cooperation’s All Members Meeting. This one-day industry event on automotive infotainment technology will take place in Frankfurt, Germany, presenting the latest and future technologies and applications based on MOST. Suggested topics include but are not limited to MOST physical layer, MOST networking and system architecture, MOST software and protocols, MOST compliance and quality, MOST series projects experience, MOST and other standards, as well as research and miscellaneous topics such as consumer products in the car. The Call for Speakers is now open and anyone interested is invited to submit a proposal for a paper by June 19, 2009. The goal is to cover a broad field of topics with a wide range of information. The MOST Forum provides an ideal venue to share ideas and experiences, and to discuss the latest news on this de-facto automotive infotainment standard. The international conference and exhibition will bring together top professionals from the automotive electronics industry and academia to exchange information and results of their recent work on the leading infotainment technology. The broad international audience will include researchers, designers, engineers, system developers, as well as purchasers and journalists, up to managers of the industries involved. The knowledge partner MOST Cooperation as well as the industry partners SAE International, ZVEI (Electrical and Electronic Manufacturers' Association) as well as the media partners Auto Electronics, Elektronik automotive, and ElektronikPraxis are contributing their expertise and technology know-how to set up a premier conference program.
	Rohrer(r) Mess- und Systemtechnik - Power - Dynamic - Precision We have been designing and manufacturing measurement equipment and systems for a wide range of applications with an experience of 40 years. We can offer complete, complex systems, realising the most critical standards. Key areas are - True linear voltage and current regulated HERO(r) power supplies from DC to MHz up to over 20kVA .The can operated in source as well as in sink mode. A wide range of high sophisticated models are designed to cover extreme requirements, like piezoelectric actuators, large magnets for quadrupols simulation and test of battery systems, subsystems in automotive and avionic, interrupts, calibration of power systems, research and test of magnetic materials, capacitors, fuel cells, X- / Y-deflection, solar cell arrays for space , piezoelectric motors and motion, Polymer research and many more - Very fast power switchers with slew rates less than 1µs full swing - High voltage protection units - Isolation amplifiers up to DC-15MHz with fibre optics Among others: multichannel systems, and the ARCUS®family with outstanding transfer characteristics. They capture signals from DC to 500kHz with exactly faithful transmission of the measured signal, no overshoot, constant signal rise and fall times of <1µs, even recovery from saturation is only 1µs. - Sensors specifically our zero flux current transducer with a resolution of <1ppm. Their main operating ranges are from about 30A up to xkA DC to some 100kHz. - Signal generators mainly for arbitrary functions according to the requirements of the qualification tests. - Analysers and recorders for documentation ( power analyser / transient recorder ) - Complete test systems e.g. power calibration for systems to over 200kVA - Software
	RS is one of the leading global distributors of over 500.000 products for small to medium purchase requirements in electronics and automation. Its modern distribution centre in Bad Hersfeld enables RS to guarantee same or next day delivery for products from its standard catalogue range. RS offers its products to SMEs and large businesses. By using RS and thanks to its e-commerce competence, RS helps its customers to save time and money and to reduce their overall cost of purchasing. Customers of RS include Carl Zeiss AG, Continental AG, Daimler AG, Deutsche Bahn AG, Deutsches Zentrum für Luft- und Raumfahrt e.V., EON AG, EnBW AG, Forschungszentrum Karlsruhe, Fraunhofer Institute, Helmholtz-Gemeinschaft, Infineon Technologies AG, Knorr-Bremse AG, Max Planck-Institute, RWE AG, Siemens AG, Thyssen Krupp AG, Vattenfall Deutschland GmbH, Volkswagen AG etc.
	Straight to the Solution - Power Supplies from Schulz-Electronic Schulz-Electronic is the provider of solutions and the development partner of choice for professional power supplies. The enterprise realizes intelligent electrical supply concepts for their client’s applications in industry, ranging from the automotive sector to the area of lasers and photovoltaics. The firm’s own group of hardware and software developers cooperates with a number of external specialized development teams. Schulz-Electronic is the representative of numerous well-known equipment manufacturers all over the world. For many brands, this enterprise, based in Baden-Baden, acts as their authorized service point and functions as a ‘quasi-producer’ in Germany. Six sales engineers service clients in Germany and Switzerland. The development division and the distribution center are in Baden-Baden. Schulz-Electronic has branches in Berlin and in Basel / Switzerland. The range of successful projects includes: Systems for the testing and simulation of vehicle on-board supply systems, Software for the controlling of electrical power supplies and test benches, and Systems for evaluation and testing of key technologies in electric and hybrid drive.
	Steepest Ascent Ltd offers design services by a team of engineers armed with exploitable wireless/mobile and DSP software IP, and extensive know-how gained from a combined 50 years of DSP and digital communications engineering experience. Since the start of the company, a strong customer list of both SMEs and international bluechips has been established in Europe, the USA and Japan. Their customers highly value the ability to deliver critical and complex solutions on time in the knowledge the engineering team is very experienced and highly educated. The core business lines of Steepest Ascent Ltd are the provision of mobile and wireless simulation libraries, DSP software tools, professional short and long term consulting, and embedded communication systems design. The company also remains active on presenting both general and custom short courses for industry. In 2008 more than 12 public courses were presented in the UK, Germany, and the USA. Additionally more than 20 on-site events were presented at company sites around the world. Steepest Ascent offers a full range of embedded electronic product design services with a core focus on communications based implementations. We can provide design skills to complement your business or provide an end-to-end service from concept through the full product life cycle. Steepest Ascent provides consultancy services for the design, specification and bit true simulation and implementation of modern DSP and communication systems with particular expertise in: Advanced Wireless Communications Design, Standards Implementation, FPGA DSP Systems Design, DSP Enabled Radio Systems, and DSP Hardware Design and Implementation.
	Tieto Automotive offers professional development services for systems and components in the automotive and transport telematics industries. We implement tailored solutions for control units, communication platforms and multimedia applications for the fields of infotainment, driver assistance systems, stability control and battery and power management. Our expertise in the areas of communications networks, mobile devices and media allows us to expand our customers' value-added chain with innovative business ideas. In our role as development partner, we take on responsibility and judge ourselves by the business success achieved by our customers. In order to ensure rapid, cost-efficient implementation, Tieto's SmartSourcing concept provides a tried and tested model that combines local expertise close to the customer with centers of excellence in Germany, Poland, the Czech Republic, China and India.
	To safeguard common interests, to exchange experience, to provide information: The 'ZVEI - Zentralverband Elektrotechnik- und Elektronikindustrie e.V.', the German Electrical and Electronic Manufacturers' Association, represents the economic, technological and environmental policy interests of the German electrical and electronics industry at the national, European and international levels. It provides specifi c information about the economic, technical and regulatory framework conditions of the electrical industry in Germany. The ZVEI promotes the development and use of innovative technologies by proposals concerning research, technological, environmental protection, educational and scientifi c policy. It supports market-orientated European and international standards-making activities. ZVEI's close contacts with political quarters and public administrations and the association's internal exchange of experience and views provide extensive information about market- and competition-related developments, which is tailored to the electrical and electronic industry's specific needs. The member companies use this lead in knowledge and experience to improve their international competitiveness.

Media Partners

Industry Partner

Exhibitors 2009

Public Relations Partner

qaqadu event gmbh
T +49 8151 555009 11
E contact@qaqadu.com